Integrative Outdoor Macro-BTS

Overview

The full name of CBTS O1 is Compact Base Transceiver Station (Outdoor type 1). As the new-generation CDMA compact and outdoor macro-BTS rolled out by ZTE, ZXC10 CBTS O1 is attached with transmission equipment, temperature control device and power supply system that are protected from rain, snow and dust,  guarded against theft and applicable for miserable and severe outdoor conditions.

Using an All-IP structure, ZTE's new-generation CBTS can fully satisfy user demands for multiple services.

Features 

 High Integration

•  Embedded transmission devices such as SDH, PDH, HDSL and micro-wave indoor equipment;
• Embedded power supply for connection to 220V/110V and the diesel power generator;
•  Embedded storage battery to ensure service continuity when the system is powered off;
•  Embedded monitor.

The completely integrated product design meets various requirements of the outdoor BTS.

Excellent Outdoor Environment Adaptability

• The CBTS O1 is an outdoor BS using sealed cabinet well protected from water, dust, burglary, rodent nuisance, and electromagnetic shielding.
• The CBTS O1 is compliable with IP55 protection standards.
• The CBTS O1 provides class-(B+C) lighting protection.
• The CBTS O1 equipment can work normally when the ambient temperature is between -40ºC (-40ºF) and +55ºC (+131ºF). It is designed with heat exchanger technology to meet the requirements for forced cooling, thus improving the reliability of components. It uses an internal heater to make sure that non-industrial components can work normally at low temperature.

 Small Size

The ZXC10 CBTS uses a compact structure. The ZXC10 CBTS only needs a small space, thus greatly saving the equipment room space.

 Large Capacity

  A single CBTS cabinet supports up to 12 carrier-sectors (4C3S). And it supports cabinet combination. In a 1x network, a single BDS shelf can support 24 carrier-sectors; In a DO network, a single BDS shelf can support 12 carrier-sectors.

Providing both 1X and DO on a Single Cabinet

Broadband RF

The CBTS RF board supports a broad frequency band. Four carriers within 10M bandwidth can be flexibly configured.

Advanced ARIR Function

It supports the advanced ARIR (Adaptive Reverse Interference Resistance) function against reverse narrowband interference and adapts to complicated wireless environments.ZTE's ARIR function supports multi-carrier reverse interference resistance.

  High Reliability

  GPS adopts dual-ovenized crystal to ensure short-term stability of the clock. The HOLDOVER algorithm is adopted to enable 72-hour locked mode after the GPS signals are lost, so that the normal operation of the BTS can be guaranteed.

Smooth Capacity Expansion and Update

Flexible Networking Modes

When both the BTS and the BSC are installed in the same equipment room or they are placed near each other, it is recommended to connect them directly. In this case, a complicated Abis link compression protocol is not required. Thus the cost is reduced and the reliability is improved.

CDMA Soft Site Base Station Series― BS 8900 Outdoor Integrated Base Station

Overview

BS 8900 is an outdoor integrated macro base station developed by ZTE based on its soft site base station platform, with the leading open uTCA architecture of the industry. It is a one-stop solution for large capacity needs of operators and supports the smooth evolution to LTE/UMB, with built in power supply and transmission.

Values to Customers

　Large capacity

　　　 48 carrier-sectors and 8 RF carriers support per cabinet, the highest capability of the industry, bringing about the possibility of expansion of much stronger networks

　Wide coverage

  　　 80W of machine-top output power, the highest of the industry, for wider coverage

　Low energy consumption

  　　 CFR + DPD + Dorherty power amplification design significantly enhance the power amplification power, with RRU's power amplification power being at 33%, reducing energy consumption by over 50% compared with traditional products.

　Less supporting facilities

　　　 Transmission shared by 1X and DO, with less transmission resources

　　　 Natural ventilation for heat dissipation, with high energy efficiency

　　　 Significantly reduced power consumption, with less power supply facilities

　Smooth Evolution

　　　 Industry-leading open uTCA architecture, highly reliable power supply management, high integration level

　　　 Smooth evolution to LTE/UMB, support for CDMA2000 / WCDMA / GSM/LTE / UMB / WiMAX base stations, simplifying management 

CDMA Soft Site Base Station Series― 8200 + R8841/R8860 Distributed Soft Site Base Station

Overview

With years of experience in wireless equipment, ZTE took the lead of the industry in launching distributed soft site base stations. The soft site base stations are "distributed" compared with traditional centralized base stations, physically separating the base band part from the radio frequency part of traditional base stations and connecting them with standard base band radio frequency interface (CPRI/OBSAI).The base band part and the radio frequency part of traditional base stations respectively constitute innovative BBU (Base Band Unit) and RRU (Remote RF Unit), meeting networking needs of operators in various scenarios.

Values to Customers

　Fast deployment

　　 Compact dimensions and light weight readily for transportation and installation; ideal for base station erection by one single person; labor cost reduced by 60% compared with traditional base stations

　Low energy consumption

  　 Only one pair of fiber optic cables is necessary between BBU and RRU for 3 sector, radio frequency loss reduced by 2~3 dB, and equipment energy consumption reduced by 40%

　　 CFR + DPD + Dorherty power amplification design significantly enhance the power amplification power, with RRU's power amplification power being at 33%, reducing energy consumption by over 50% compared with traditional products.

　Compact design

　　 RRU is ready to be installed on towers, building roofs hung on walls, and BBU can be fixed in instrument shafts, basement, any 19" standard rack, for zero area occupation

　Less supporting facilities

　　 Transmission shared by 1X and DO, with less transmission resources

　　 RRU is ready to be installed outdoor; BBU installed indoors typically consumes energy no higher than 150 W; and with national ventilation for heat dissipation, air conditioning is omitted (electricity cost reduced by RMB 9,000 based on the energy consumption of a 1.5 p air conditioner)

　　 Significantly reduced power consumption, with less power supply facilities

　　 Sufficient sharing of base band resources, with reduced machine rooms

　Smooth Evolution

　　 Industry-leading open uTCA architecture, highly reliable power supply management, high integration level

　　 Smooth evolution to LTE/UMB, support for CDMA2000 / WCDMA / GSM/LTE / UMB / WiMAX base stations, simplifying management 

 

CDMA Soft Site Base Station Series― BS8800 Indoor Macro Base Station

Overview

BS 8900 is a indoor macro base station developed by ZTE based on its soft site base station platform, with the leading open uTCA architecture of the industry, meeting large capacity needs of operators and supports the smooth evolution to LTE/UMB.

Values to Customers

　Large capacity

　　　 48 carrier-sectors and 8 RF carriers support per cabinet, the highest capability of the industry, bringing about the possibility of expansion of much stronger networks

　 　  Support for dual frequency ranges, maximized use of frequency range resources

　Wide coverage

　　　 80W of machine-top output power, the highest of the industry, for wider coverage

　Low energy consumption

　　   CFR + DPD + Dorherty power amplification design significantly enhance the power amplification power, with RRU's power amplification power being at 33%, reducing energy consumption by over 50% compared with traditional products.

　Compact design

　　　 The smallest base station of 48 carrier-sectors, taking up an area of only 0.27 sqm

　Less supporting facilities

  　　 Transmission shared by 1X and DO, with less transmission resources

  　　 Significantly reduced power consumption, with less power supply facilities

　Smooth Evolution

  　　 Industry-leading open uTCA architecture, highly reliable power supply management, high integration level

  　　 Smooth evolution to LTE/UMB, support for CDMA2000 / WCDMA / GSM/LTE / UMB / WiMAX base stations, simplifying managmet

ZTE super-mini CDMA base station ZXSDR BS8802

"Upholding traditional innovation and predominance, ZTE launches Gecko, a brand
new super-mini CDMA base station. Its tradition-surpassing architecture and
application mode have been the focus of the industry. Gecko has brought
revolutionary innovations, such as low cost, quick deployment, and full
integration; and has effectively and perfectly satisfied operators' requirements
of network construction in blind and hotspot areas."
Highlights
Quick network deployment: the product can be transported, carried and mounted by
a single person; and can be mounted on the wall, pole or ceiling; supporting AC
power supply
Zero maintenance fee: supporting auto-configuration, self-recovery, and remote
maintenance, etc.
Leading technical platform: supporting multi-core CPU processing technology,
high-integration baseband and high-efficiency RF processing module
Innovative access mode: supporting the transmission over public network or
dedicated network; accessing ADSL/CableModem, switch, xPON, and satellite
transmission
Perfect clock scheme: supporting GPS, RGPS, and 1588; different clock scheme can
be selected for different scenario flexibly
Outstanding performance: large capacity, a single base station can support 31 1x
users and 64 DO users at most; wide coverage, the coverage radius of a single
base station can reach 300 meters at full power
Supporting all-around services: supporting CDMA2000 1x, EV-DO Rev.A, and EV-DO
Rev.B simultaneously
Customer Benefit

Lowering TCO
Small in size, light in weight, flexible installation; lowering the site
acquisition fee, transportation cost and installation fee;
Large capability, wide coverage, saving investment in sites
Auto-configuration, fault self-recovery, zero maintenance fee
Improving user experience
Co-layout with other outdoor base stations, the convergence of the whole network
brings users with smoother and seamless feeling
Unified neighbor cell configuration, enhancing the whole network performance and
user satisfaction
Accelerating network construction
Flexible installation, only needing a single person for site construction; can
be mounted on the pole, ceiling or wall; applicable to any complicated indoor
scenario;
Supporting transmission via IP Ethernet access, achieving indoor signal coverage
without DAS system
Protecting environment
Super-low radiation, bringing a new life with healthy and low-carbon
communication
Specifications

Scenarios

Base Station Controller

ZTE base station controller is based on all IP unified hardware platform with
high integration, high capacity, flexible and efficient features.
Highlights
Large Capacity and High Expandability
ZTE base station controller provides a large capacity and is easy to be
expanded.

All IP Architecture, High Efficiency
Based on the all IP switch platform, high efficient and flexible data
transmission is supported, which can totally meet future high data services
requirements.

High Reliability
The controller has high reliability and stability. The system is based on
redundancy design. So there is no single point of failure. The system supports
online software download and there is no need to reboot after version upgrade.

Outstanding Radio Resources Management
The controller owns dozens of patents on radio resources management regarding
radio parameter automatic optimization, radio resource priority intelligent
allocation and scheduling based on network load and Qos level, etc..

SDR Outdoor Micro Base Station

ZTE outdoor micro base station of SDR series products is used for coverage
supplement in hot-point and blind-point areas. The hardware architecture is
based on ZTE unified MicroTCA platform and MCPA technology is adopted in the
radio part. It consists of two main parts: Baseband unit and RF modules. It can
support both GSM and UMTS simultaneously, so 2G/3G networking becomes very
flexible.
Highlights
Small Size and Weight, Easy for Transportation and Installation:Supports
ground-mounted, post-mounted and wall-mounted installation modes, which
effectively save costs for site construction and speed network deployment. It
supports maintenance at front and leading-out at the bottom.

High Integration and Reliability, Strong Adaptive Ability in Tough Working
Environment:Built-in transmission devices and C-level lightning protection
module to save the operator's investment. It is more adaptable to environment
benefiting from its wider range of working temperature and humidity. It is more
suitable for outdoor situations.

All IP Micro TCA architecture, Smoothly Evolve to Future Network: Adopts Micro
TCA architecture, fully supports IP RAN networking, provides FE/GE interface and
fully satisfies HSPA+ data throughput and future evolution to and LTE.

Series of Multi-carrier RF Modules, Smooth Expansion:Series of Multi-carrier RF
Modules can be configured G/U dual mode flexibly with software upgrade only,
which can fully satisfy 2G/3G network capacity expansion requirements with low
cost in the future.

High Efficiency Power Amplifier, Low Power consumption:The PA efficiency
achieves 50% with ZTE patent Doherty + DPD + D-PT technology. High Efficiency
Power Amplifier can effectively reduce the OPEX

SDR Distributed Base Station

ZTE distributed base station of GSM & UMTS SDR series products, is suitable for
multiple indoor and outdoor coverage scenarios. There are many types of
combination portfolios according to different RRUs connecting with BBU. It
develops a new solution for 2G/3G mixed networking and network evolution by only
one set of RAN equipments, so that the network construction cost is greatly
decreased.
Highlights
Series of RRU, Suitable for Various Coverage Scenarios
Series of RRUs with high output power and diversified power amplifier
transmitting and receiving design, are suitable for various coverage scenarios.
It enables operators to further balance the relationship between radio network
performance and investment.

Shelf Plug-in Dual-Mode BBU, Reliable Design & Easy Installation
ZTE BBU module has hot-standby design for main control board. Baseband resources
are shared in the form of resource pool, and common resources are shared between
GSM & UMTS, such as main control unit, transmission and CPRI interfaces. These
ideas promote the reliability and availability of dual-mode applications. BBU
can also be conveniently deployed on the wall, on the ground, etc. No dedicated
equipment space is required, easy for site selection, fast network deployment.

All IP Micro TCA architecture, Flexible Networking
Adopts Micro TCA architecture, ATM/IP dual protocol stacks, provides various
interfaces.

Dual Mode Configuration, Smooth Evolution
UMTS and GSM can be supported simultaneously. GSM/GPRS/ EDGE/Enhanced
EDGE/UMTS/HSPA/HSPA+ are fully satisfied as well as future evolution to LTE.

Multi-Carriers and Multi-Frequencies Support
RRU module supports UMTS carriers or GSM carriers in single mode, and GSM/UMTS
dual mode in multi-frequencies.

High Efficiency Power Amplifier, Low Power consumption
The PA efficiency achieves 50% with Doherty + DPD Technology that independently
developed by ZTE. 80W power amplifier (TOC) is supported, which can effectively
reduce the OPEX

SDR Indoor Macro Base Station

ZTE indoor macro base station of SDR series products, can offer various coverage
solutions for dense urban, urban, suburban, highway, and indoor scenarios. It
consists of two main parts: Baseband unit and RF modules. It develops a new
solution for 2G/3G mixed networking and network evolution by only one set of RAN
equipments, so that the network construction cost is greatly decreased.
Highlights
All IP Micro TCA architecture, Smoothly Evolve to Future Network
The SDR indoor macro BS adopts MicroTCA architecture, fully supports IP RAN
networking, provides FE/GE interface and fully satisfies evolution to Enhanced
EDGE, HSPA+ and LTE.

High Spectrum Efficiency, Smooth Evolution
GSM and UMTS can be supported simultaneously in one BS which enables GSM
operator smoothly evolve to UMTS/HSPA/HSPA+ while making full use of the
frequencies released by GSM. The CAPEX and OPEX can be greatly saved.

High-Reliability Dual-Mode BBU
ZTE BBU has hot-standby design for main control board and resource pool for
baseband processing. Resources are shared between GSM and UMTS, including main
control unit, transmission and CPRI interfaces.

Integrated RF Unit
RF unit is integrated with transceiver unit, duplex filters, power amplifier
module, and MCPA module. This design reduces boards' quantity, saves costs,
decreases communication requirements and interfaces between boards, and greatly
improves the overall reliability.

Large Capacity, Flexible Configuration
The baseband capacity flexibly supports GSM or UMTS or dual mode. Its baseband
resource can be flexibly configured for both local and remote coverage
simultaneously.

Series of Multi-carrier RF Modules, Smooth Expansion
Series of Multi-carrier RF Modules can be configured G/U dual mode flexibly with
software configuration only, which can fully satisfy 2G/3G network capacity
expansion requirements in the future.

High Efficiency Power Amplifier, Low Power consumption
The PA efficiency achieves 50% with ZTE patent Doherty + DPD + D-PT technology.
High Efficiency Power Amplifier can effectively reduce the OPEX.

SDR Outdoor Macro Base Station

ZTE outdoor macro base station of SDR series products enables operator to deploy
high capacity base stations at areas where equipment room cost is expensive or
difficult to acquire. Based on SDR architecture, it offers GSM/UMTS dual-mode
networking capability and provides a future-proof solution for smooth evolution
to Enhanced EDGE, HSPA+ and LTE.
Highlights
Flexible Deployment
The SDR outdoor macro BS is highly modularized to adapt various site conditions,
and suitable for various networking needs. It decomposes a base station into
Outdoor RF Cabinet, Site Support Cabinet and Battery Cabinet, and can be easily
installed separately in constrained locations. Auxiliary equipments, including
transmission, battery and power supplier, are integrated into the cabinet to
provide a full functional outdoor base station solution.

Smooth Evolution
GSM and UMTS can be supported simultaneously in one BS, enables operator
smoothly evolve from GSM to UMTS, making full use of the frequencies released by
GSM and reducing TCO greatly. The SDR outdoor macro BS support high performance
HSPA with DL 14.4Mbps/UL 5.76Mbps, and HSPA+ functions that DL data throughput
reaches 28.8Mbps. Evolution from HSPA to HSPA+ needs only software upgrade.

Scalable Configuration
Baseband capacity can be flexibly expanded, facilitating operator to enlarge
their network smoothly. Baseband resources can be allocated for local RU or
remote RRU according to practical needs.

Leading Efficiency Level
Powered by innovative design and algorithm, ZTE features Doherty + DPD
Technology to the PA and boosts its efficiency to 50%, which is a leading
benchmark in the industry